Stony Point sits at the northern edge of Rockland with larger, more spread-out properties and a good deal of oil heat. Carey & Walsh covers it 24/7, arriving with the parts these systems actually need.
Stony Point is the most rural part of our Rockland coverage. Properties sit on larger parcels, homes are further apart, and natural gas does not reach everywhere — so oil-fired heating is common and a good number of homes run on well and septic besides. Distance changes the work: a second trip for a part costs a lot more time here than it does in a dense village, which is why our vehicles carry the components oil and gas systems actually fail on. Housing runs from older frame homes near the hamlet centre to newer construction on the wooded parcels around it.
Riverfront villages like Stony Point also see their own weather pattern — humid, sticky summers off the Hudson and damp, raw winters that are hard on aging heating equipment. Between the older housing stock and the local climate, Stony Point homeowners deal with a particular set of HVAC challenges that a contractor unfamiliar with the area can easily get wrong. We've been working in Westchester's river towns since 1944, and our technicians know what to expect before they ring the doorbell — whether that's a cramped basement boiler room in a pre-war home near the village center or a modern forced-air system in a newer build closer to the Saw Mill River Parkway.
Oil-fired equipment is particularly common here, alongside gas furnaces and hot-water systems. Burner tuning, combustion testing and control diagnosis are routine.
Central air where ductwork exists, ductless for additions, converted spaces and older homes where running ducts was never practical.
The most common heating system in Stony Point's newer construction. We repair, maintain and install every major brand, from standard efficiency through modern condensing units.
Found in some of the older homes near the hamlet centre. One-pipe and two-pipe systems, pressure controls, low water cutoffs and main venting.
Cast-iron radiators and baseboard loops across much of the older housing here. Circulators, zone valves, expansion tanks and controls.
Increasingly common on additions and retrofits where extending ductwork was impractical. Repair, maintenance and replacement across all brands.
Zoned heating and cooling without ductwork — the practical answer in older Stony Point homes with no duct chases. We are a Mitsubishi Diamond Contractor.
Particularly common in Stony Point, where natural gas does not reach every property. Burner service, combustion testing, nozzles, electrodes and controls.
Stony Point sits at the northern edge of our Rockland coverage and is serviced around the clock, every day of the year. Our vehicles carry the parts these systems most often need.
The highest dealer designation Mitsubishi Electric awards, earned on installation quality and training — which matters wherever ductless is the practical answer.
We fabricate our own ductwork and transitions, which is what makes retrofits possible in older homes where nothing is a standard size.
Carey & Walsh has worked in this county since 1944. We know these houses, and we are still here when something needs attention in five years.
Along with Stony Point, our fleet regularly covers the surrounding communities and the rest of Westchester County.
📋 Schedule Service in Stony Point
Have a question about your furnace, boiler, or AC that isn't answered here? Our team is happy to talk it through.
Call 914-762-9600Yes. No-heat and no-cooling calls are dispatched around the clock, 365 days a year including holidays. Stony Point is within our core service area and our fleet runs from Briarcliff Manor.
Stony Point is at the outer edge of our service area, so we are honest about it: response here takes longer than in Briarcliff Manor. What we do to compensate is carry the parts these systems fail on, so the call gets resolved on the first visit rather than turning into two long trips.
Often yes. Where there are usable closets, chases or attic runs we fabricate ductwork in-house and can frequently make a conventional system work. Where that is genuinely impractical, ductless mini-splits give you zoned cooling without opening up the house.
Yes, and it is a genuine specialty rather than something we tolerate. Low water cutoffs, pressuretrols, main venting, near-boiler piping and water hammer are routine work for us. Banging radiators are usually a pressure, pitch or venting problem — not a failing boiler.
All major heating and cooling brands. Our vehicles carry the parts most commonly needed on the equipment found in this area, which is why a large share of repair calls are finished on the first visit.
Yes. Seasonal maintenance is the single most effective way to avoid an emergency call, particularly on steam and older equipment where small faults compound quietly.
It depends entirely on what has failed, and quoting a figure before seeing the system would not be honest. You get a written estimate with parts and labor separated before any work begins, and nothing starts until you approve it. Call 914-762-9600 for a free estimate.
Heating, cooling, steam, ductless and 24/7 emergency response across Stony Point — from the contractor this area has used since 1944.